EN1176-2 / ISO 8124-4 Swing Suspension Connector Durability Testing Machine
EN1176-2 / ISO 8124-4 Swing Suspension Connector Durability Testing Machine
Product introduction of the Swing Suspension Connector Durability Tester
Suspension connectors and means of suspension are cycled 180 000 times under load to simulate use.
Product parameters of the Swing Suspension Connector Durability Tester
| Load | 6.75kg,13.5kg,18.5kg,30kg |
| Swing angle | ±5°~±45°(10°~90°) |
| Test speed | 1~60r/min |
| Standard | ISO8124-4 6.8 |
Product Feature and Application of the Swing Suspension Connector Durability Tester
Procedure
Attach each type of swing element to its support member in accordance with the installation instructions, and mount in a suitable test fixture.
Flexible components of the swing element may be replaced by rigid components of at least the same size and mass, as long as the alternate components do not affect the moving parts of the swing element.
Secure the appropriate test mass to each occupant position to be tested.
Oscillate this suspended unit through an arc with an included angle as specified for a total of
180 000 cycles (forward and backward).
Determine whether any loosening or structural failure of the suspension connector occurs.
