Non Combustibility Tester
Non Combustibility Tester with Programmable Temperature Controller
Product introduction of the Non Combustibility Tester
The EN ISO 1182 Non-combustibility test is one of the series of Euroclass test standards. This test specifies a procedure for determining whether or not a material will contribute directly to fire development and is relevant to classification of all building products (including floorings) into classes A1 and A2.
Product parameters of the Non Combustibility Tester
1.Non-Combustibility Furnace measures incombustibility and combustibility of uniform building material and non-uniform building material of actual element.
2.The evaluations (results) are rising temperature in the furnace, basic mass loss and ignition of specimen.
3.Single Zone Furnace operable at up to 900 ℃ with the Kanthal Ribbon Heater.
4.750±5℃ temperature automatically control by PID and Power controller.
5.Provided with stabilized voltage supply for more quick temperature stabilization.
6.Equipped with 3 thermocouples, for temperature in furnace, specimen center, and specimen surface respectively.
7.360 degree rotatable and height adjustable thermocouple scanning device.
8.Inner furnace thermocouple device to calibrate the temperature of furnace.
9.Testing results include Mass Loss(g) and Rate(%) 、Ignition Time(s) and Sustained Flaming(s) 、Initial & Maximum Furnace Temperature(℃) 、Final Furnace Temperature(℃) 、Maximum Specimen Center Temperature(℃) 、Final Specimen Center Temperature(℃) 、Furnace Temperature Rise(℃) 、Specimen Center & Surface Temperature Rise(℃).
Product Feature and Application of the Non Combustibility Tester
1.Equipped with a programmable temperature controller to provide a standard temperature rise curve;
2.The test time is 24 hours, and the temperature display and control are performed throughout the entire process;
3.Compliance with test standards BS 8414, GB/T29416-2012 "Test methods for fire performance of building exterior insulation systems" Appendix C test methods;
4.The test software can display temperature values and temperature profiles;
5.Providing thermocouples in the furnace and thermocouples on the surface of the sample;
6.The center temperature of the sample is the same as the furnace temperature, indicating that the sample has no tendency to smolder in the test cycle and temperature range;
7.During the entire test (24 h), the test trajectory with self-heating characteristics appeared, and the sample was judged to have a smoldering tendency.
Application:Non Combustibility Tester is mainly used for the fire performance test method of the external thermal insulation system of the building exterior, and is suitable for testing the smoldering characteristic test of the thermal insulation material in the external thermal insulation system of the building.
Product Details of the Non Combustibility Tester
Standard: BS 8414-1：2002
GB/T 29416：2012
Dimension: 500 mm (W) x 500 mm (D) x 900 mm (H)
Weigth:39KG
Installation requirements
Power requirements: 220V, 10A
Ambient temperature: 10 ° C to 35 ° C
Installation space: floor-standing fume hood
