EN71-8 Template D for Assessment of Head and Neck Entrapment
EN71-8 Template D for Assessment of Head and Neck Entrapment
Product introduction of the Template D
This template is used for assessing partially bound and V-shaped openings for head and neck entrapment.
Product parameters of the Template D
| Material | Alu.alloy |
| Size tolerances | +/-1mm |
| Angle tolerances | +/- 1degree |
Product Feature and Application of the Template D
It is used to test the evaluation of template to head and neck sick into parts of closed V type open.
Product Details of the Template D
Procedure
Position the “B” portion of the test template between and perpendicular to the boundaries of the opening,
Observe whether the template fits within the boundaries of the opening or whether it cannot be inserted to its full thickness Determine whether the opening is accessible or not accessible b) If the test template can be inserted to a depth greater than the thickness of the template (45 mm) when tested in accordance with a), apply the “A” portion of the test template, so that its centre line is in line with the centre line of the opening. Ensure that the plane of the test template is parallel and applied in line with the opening
