Full Facemasks Combustion Resistance Tester
Full Cover Combustion Resistance Tester
Product introduction of the Full Cover Combustion Resistance Tester
Full Cover Combustion Resistance Tester is suitable for testing the combustion resistance of self-contained open-circuit compressed air respirator (air respirator) in EN136 standard. The combustion performance of air respirator can be tested by means of 6-point burning or single-point burning flame impact.The flame retardancy tester is mainly used to test the flame retardancy of the comprehensive protective mask after six different parts of the flame ignited at the same time for a certain time. It is a special testing instrument for the flame retardancy of the comprehensive protective mask.
Product parameters of the Full Cover Combustion Resistance Tester
1. Equipped with the first metal texture simulation device, it can be used for wearing air respirator device.
2. It is equipped with K-type thermocouple, which is placed at 250mm on the top of the highest burner and can detect the temperature of 950 + 50 degrees.
3. Equipped with 6 TEKLU burners, the height of each burner can be adjusted by itself.
4. The gas flow rate supplied to the burner can be adjusted and controlled by a rotor flowmeter.
5. The pressure regulating device can adjust the pressure supplied to the burner to 10-50KPA.
6. Metal texture simulation head can be rotated, and the rotation speed can be adjusted to meet the standard test requirements.
7. Single-point combustion and six-point combustion can be realized, and can be tested according to different standards.
Product details of the Full Cover Combustion Resistance Tester
1. The mask fixture is a metal human head model, which can fully simulate the actual use of the mask.
2. The burner is equipped with a propane gas interface.
3. The height of burner flame can be adjusted.
4. The face mask head die fixture can be adjusted in both vertical and horizontal directions at will.
5. Automatic recording of ignition time and digital display.
6. It is equipped with flame temperature measuring probe and flame temperature display.
Product parameters of Full Cover Combustion Resistance Tester
1. The total gas flow rate of six igniters is (21±0.5) L/min.
2. The flame height can be adjusted.
3. The diameter of flame temperature measuring probe is 1.5mm
4. The temperature of the flame at 250mm from the top of the burner is (950±50)degrees Celsius.
5. The distance between the top of the burner and the six ignition points of the mask is 250mm.
6. Metal die wall thickness 2-3 mm, flame resistance and combustion resistance
| Flame height | can be adjusted |
| Ignition time timer | 0-99.99 seconds |
| Accuracy | ±0.01 seconds |
| Standard | CSN EN 136:1998 GB/T 16556:2007 |
| Application | Safety Protection |
| Dimensions | 1200mm (W) x 700mm (D) x 1,900mm (H) |
| Weight | 176KG |
| Electrical requirements | AC220V, 50Hz, 50W |
| Gas requirements | propane gas |
