ASTM F1566 Mattress Rollator Testing Machine
Servo Motor Mattress Integrated Testing Machine
Product information
To determine the durability of any type of mattress and boxspring unit (regardless of the materials) by simulating long term use condition.
The Rollator type mattress durability tester determines the quality of support of mattress and box spring unit after repeatedly impacts and cyclic movement applied on the surface, Using the cylinder or hexagon to simulate the body of human continuously roll on the mattress.
Technical parameters
Product Information
To determine the durability of any type of mattress and boxspring unit (regardless
of the materials) by simulating long term use condition.
The Rollator type mattress durability tester determines the quality of support of mattress and box spring unit after repeatedly impacts and cyclic movement applied on the surface, Using the cylinder or hexagon to simulate the body of human continuously roll on the mattress.
Feature
1. The whole machine frame made of high quality aluminum, with smart and elegant shape
2. Delta brand PLC and Servo Motors
3. Machine configuration two motors, one for the vertical direction of the roller, and the other is responsible for the horizontal direction of the drum drive, the two motors are used in DELTA servo motor
4. Machine configuration alarm device, indicating the safe operation
5. Electric lifts the Roller, easy to operate.
Technical parameters
6. Firmness Rating
| The loading platen | 344 +/-5 mm diameter, 1mm radius bottom edge |
| The loading speed | 20 ~ 300mm/min |
| Test run | 500mm |
| Capacity | 200kg |
| The loading wheel position adjustment | About 300mm |
7. Durability Test
| Hexagonal wood barrel (ASTM F1566) | 109kg, Length 36±3in(915±75mm) |
| Maximum size of mattress | 2.2m×2.5m |
| Test speed | 0-20r/min |
| Control method | PLC+ touch screen |
| Dimension | 3000mm×1510mm×2010mm |
| Power | AC220V±10%, 50/60Hz, single phase |
| Accessory | One Hexagonal barrel, Cylinder weight |
| According to different mattress to adjust the rolling stroke (adjust the limit switch position) | |
| Low coefficient of friction guide, ensure full drum weight on the mattress. | |
| LCD Touch Screen display provides easy control and setting | |
Height measurement
1) Accuracy: ±0.5mm;
2) Height measuring pad: measuring the surface is a smooth and rigid rigid cylinder;
3) Measuring the diameter of the block: 100mm, chamfer R10;
4) The force application speed of the pad: 100±20mm/min;
5) Vertical downward force: Apply 4N force, at this time, the circular pad measures the distance between the lower surface of the surface and the flat surface as the mat surface height of the mattress;
Measuring height: the height of the initial mat surface of the mattress is 100 times, and after 29,900 endurance tests, the height of the mat surface is measured separately;
Altimeter system: Set the force value through software, apply the speed vertically downward, and directly link with the PLC touch screen.
Testing Standards
ASTM F1566
Features
PLC controller with large 7 in colorful touch panel
Motor: servo motor, precise force control
Test procedure can be programmed on the panel
Automatically stops after preset cycles completed
Emergency stop buttons
Over moving limit protection
Roller softly contacts the surface of the mattress
The mattress durability tester is used for
Boxspring Mattresses
Innerspring Mattresses
Polyurethane Mattresses
